Motorcycle Computer Instructions - Sherco 125 SE/R Manuel Du Propriétaire

MOTORCYCLE COMPUTER INSTRUCTIONS

Button 1:
Change screens 1,2,3
Hold button 1:
Screen 1: DST Adjust
Screen 2: DST2 Adjust
Screen 1: Speed, Clock, Distance 1
Screen 3: Alternating AVG/MAX speed,
Accumulated run time, ODO
n Mode buttons
The vehicle doesn't need to be switched on
Left button:
Switch between the three display screens
Enter adjustable trip distance mode ( DST
and DST2)
Decrement distance while in adjustable
distance mode
Hold buttons 1 et 2:
Setup mode
Screen 3: Reset MAX/AVG
Screen 2: Speed, Clock, Distance 2
Turn indicator
High beam
Fuel injection (MIL): EFI problem
Low fuel
Right button:
Switch between the three display screens
Resets Trip distance 1, Trip distance 2,
maximum and average speed (when pressed
and held for three seconds)
Increments distance while in adjustable
distance mode
In order to avoid any
water ingress, keep
a minimal washing
distance of 20cm.
Button 2:
Change screens 1,2,3
Hold button 2:
Screen 1: Reset DST
Screen 2: Reset DST2
CAUTION
85