Sherco 125 SE/R Manuel Du Propriétaire page 86

125 SE/R
Control devices and controls (continued)
Fig 1 SPD function
Fig 2 MAX speed function
Fig 3 AVG function
Fig 4 DST function
Fig 5 DST2 function
86
SPD function Current speed (screens 1 and 2):
displays the current speed of the vehicle.
The speed can be displayed in km/h (default)
or mph. ( p.86)
☛
MAX speed (screen 3): displays the maximum
speed since the last reset was performed.
The maximum speed can be displayed in
km/h (default) or mph. (
Reset to 0 → MAX Function → Hold the right
Button down for 3seconds → 0 → Reset to 0
done
AVG function Average speed (screen 3): displays
the average speed of the vehicle since the
last reset was performed.
The average speed is displayed in the chosen
units, km/h (default) or mph (
Reset to 0 → AVG Function → Hold the right
Button down for 3seconds → 0 → Reset to 0
done
DST function (screen 1): displays the mileage
traveled by the vehicle since the last reset
was performed.
The distance is displayed in the selected
units, km/h (default) or mph (
Reset to 0 → DST Function → Hold the right
Button down for 3seconds → 0.0 → Reset to
0 done
DST2 function (screen 1): displays the mileage
traveled by the vehicle since the last reset
was performed.
The distance is displayed in the selected
units, km/h (default) or mph (
Reset to 0 → DST2 Function → Hold the right
Button down for 3seconds → 0.0 → Reset to
0 done
p.88)
☛
p.88)
☛
p.88)
☛
p.88)
☛