Checking The Tire Pressure - Sherco 125 SE/R Manuel Du Propriétaire

125 SE/R
Wheels, tires (continued)

CHECKING THE TIRE PRESSURE

122
1 1 1 1 1 2 2 2 2 2 2 2
Install the rear wheel in the swing arm and install
the axle (grease the axle prior to installation)
Mount the chain.
Install the chain tensioner
but do not tighten.
Check the chain tension (
Tighten the nut .
2
Rear Axle nut
Operate the rear brake pedal several times until
the pads touch the disk.
Remove the bike from the stand.
Regularly check the tire pressure with a precision
pressure gauge.
- Remove the valve cap.
- Check air pressure when the tire is cold.
Tire air pressure when used in rough terrain.
Front
Rear
If the pressure does not comply with the above
table:
- Correct the pressure.
- Replace the valve cap.
and install the nut
1
p.115)
☛
M24 100Nm
0,9bar (13 psi)
0,9bar (13 psi)
2