Filling The Coolant - Sherco 250 SE-R Manuel Du Propriétaire

250-300 SE/R
Cooling System (continued)

FILLING THE COOLANT

92
- Remove the bleed screw
- Pour the coolant into the radiator through
2
- Continue filling.
- Fill until the coolant reaches the level
- Put the bike on the side stand and follow the
gasket
the cap .
1
Coolant
Radiator bleed
screw
(approximately 1.1 liters)
rest of the filling procedure (
using a new
2
Minerva Perma Universal
D 4 -25°C
M6X70 8Nm
p.90)
☛