Motorcycle Computer Instructions; Mode Buttons - Sherco 250 SEF/R Manuel Du Propriétaire

250-300 SEF/R
Control devices and controls (continued)

MOTORCYCLE COMPUTER INSTRUCTIONS

Button 1:
Change screens 1,2,3
Hold button 1:
Screen 1: DST Adjust
Screen 2: DST2 Adjust
Screen 1: Speed, Clock, Distance 1
Screen 3: Alternating AVG/MAX speed,
Accumulated run time, ODO
n Mode buttons
The vehicle doesn't need to be switched on
Left button:
Switch between the three display screens
Enter adjustable trip distance mode ( DST
and DST2)
Decrement distance while in adjustable dis-
tance mode
78
Hold buttons 1 et 2:
Setup mode
Screen 3: Reset MAX/AVG
Screen 2: Speed, Clock, Distance 2
Turn indicator
High beam
Fuel injection (MIL): EFI problem
Low fuel
Right button:
Switch between the three display screens
Resets Trip distance 1, Trip distance 2, maxi-
mum and average speed (when pressed and
held for three seconds)
Increments distance while in adjustable dis-
tance mode
In order to avoid any
water ingress, keep a
minimal washing dis-
tance of 20cm.
Button 2:
Change screens 1,2,3
Hold button 2:
Screen 1: Reset DST
Screen 2: Reset DST2
CAUTION