AVG AVO-308CS2-OREGON Instructions D'installation Et Guide De L'usager page 29

INSTALLING THE UNIT
Figure 1
Step 5: Plug the power cord into the socket (see Figure 4).
Step 1: Mark the leveling point of the hood. Position two
mounting screws on the wall, leaving 1/8" off the
wall.
Step 2 Measure the width of the chimney then attach the
:
chimney mounting brackets to the wall at the desired
height, taking into account the minimum clearance
between the hood and the cooking surface (see
installation drawing on page 20
Step 3: Align hood‐mounting holes to the screws on the wall
and hook the hood into place. Tighten screws to
secure hood to the wall. CAUTION: Make sure the
range hood is secure before releasing
Step 4: Slide a 6" round metal ductwork over
29
).
!
the adapter / plug (see Figures 3a or
3b). Seal the joints with metal tape
.