Analog way OCTO-FX2 Manuel Utilisateur page 88

APPENDIX A / ANNEXE A
COMMAND RESPONSE
COMMANDE RÉPONSE
FRAME & LOGOS COMMANDS (continued)/ COMMANDES DU MENU LOGO & FRAME (suite)
lE lE
lF lF
LE LE
Le Le
Lb Lb
LR LR
Lr Lr
TL TL
Tl Tl
Ld Ld
Lf Lf
NOTE: To store a logo you should:
Select the logo recording mode with the LM command (1LM).
Adjust the position and size of the logo storing area with the LU, Lu, LK and Lk commands.
Select the Luma key type (Le command), adjust the luma key level (LE command) and the background color (with Lb
command).
Select a logo memory with the LC command and do a store with LR command (1LR).
To store a frame display you should:
Select the frame recording mode with the LM command (3LM), and do a store with the LR command (1LR).
NOTE: To assign a logo/frame to an input you should:
Select the assignment mode with the LM command (0LM).
Select the input with the PC command.
Select a stored logo/frame with LA, LB or LF commands.
Adjust the horizontal & vertical position of the logo with the LH, Lh, LV & Lv commands.
AUDIO COMMANDS / COMMANDES AUDIO
AC AC
AO AO
AV AV
AT AT
AS AS
AL AL
AB AB
AX AXMU
NOTE: Rd/Wr = Read and write command / Commande de lecture et d'écriture.
PAGE 88
COMMAND DESCRIPTION
DESCRIPTION DE LA COMMANDE
Status of the logo memories
Status of the logo memories
Luma key level.
Luma key type
Background color.
-In recording mode: frame/logo storing.
-In erase mode: frame/logo erasing.
Stop the frame storing.
Logo 1 transparency
Logo 2 transparency
Fade logo duration (0.01 second step).
Fade frame duration (0.1 second step).
Audio source selection.
Audio mode.
Mater volume.
Mute.
Mono/stereo mode.
Audio level (works with PC command) Rd/Wr
Audio balance (works with PC)
Auxiliary source.
TYPE
MIN MAX
Rd 0 1 0 = logo memorized.
0 1 0 = logo memorized.
Rd
Rd/Wr 0 255
Rd/Wr 0 1 0 = Black
Rd/Wr 0 7
1 = STORE (automatic reset).
Rd 0 1
1 = ERASE (automatic reset).
Rd/Wr 0 1 1 = stop the frame storing (automatic reset).
Rd/Wr 0 15 0 = mini
Rd/Wr 0 15 0 = mini
Rd/Wr 15 255 15 = 0.15 second
Rd/Wr 5 50 5 = 0.1 second
Rd/Wr 1 8 1 = audio source #1.... 8 = audio source #8.
Rd/Wr 0 1 0 = auto follow
Rd/Wr 0 255
Rd/Wr 0 1 0 = mute OFF
Rd/Wr 0 1 0 = stereo
0 64 0 = minimum
Rd/Wr 0 64 0 = left to maximum
Rd/Wr 0 1 0 = used
Rd = Read only command / Commande de lecture uniquement.
OCTO
VALUE /VALEUR
DESCRIPTION
1 = empty memory.
1 = empty memory.
1 = white
15 = maxi
15 = maxi
255 = 2.5 seconds
50 = 5 seconds
1 = breakaway
1 = mute ON
1 = mono
1 = maximum
64 = right to maximum
1= unused.
²
/ QFX402