Chapter 2 : Starting; Octo² Connections; Quattro Fx Connections - Analog way OCTO-FX2 Manuel Utilisateur

Chapter 2 : STARTING

²
2-1. OCTO CONNECTIONS
NOTE: Turn OFF all of your equipment before connecting.
Connect the AC power supply cord to the device and to an AC power outlet.
Connect your computer & video sources to the 8 universal inputs of the device.
• If you need to connect a digital computer source, use the input #1 (DVI-I IN connector).
• Connect your others sources to the unused inputs. See following sections to have a complete description.
IMPORTANT: Connect only one source by input.
Connect your display device (projector, plasma screen...) to the HD15 or DVI connectors.
Turn ON the device (rear panel switch). Then turn ON all your input sources and then your display device.
• Connection diagram:
4
1
2

2-2. QUATTRO FX CONNECTIONS

NOTE: Turn OFF all of your equipment before connecting.
Connect the AC power supply cord to the device and to an AC power outlet.
Connect your computer & video sources to the 4 universal inputs of the device.
• If you need to connect a digital computer source, use the input #1 (DVI-I IN connector).
• Connect your others sources to the unused inputs. See following sections to have a complete description.
IMPORTANT: Connect only one source by input.
Connect your display device (projector, plasma screen...) to the HD15 or DVI connectors.
Turn ON the device (rear panel switch). Then turn ON all your input sources and then your display device.
• Connection diagram:
4
1
PAGE 14
2 2
2 2
3
3
3 3
²
OCTO / QFX402
ANALOG WAY