Audio Inputs - Analog way SMART FADE SMF251 Manuel Utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Chapter 4 : STARTING
4-6. DISPLAY OUTPUT
The SMART FADE
connector : use the supplied BNC to HD 15 cable (See connection schematic below).
The SMART FADE
your display device only accepts Composite Sync., connect the C.SYNC. cable to the H BNC of the SMART FADE
select COMP (Composite Sync.) in the LCD menu # 2-1.

4-7. AUDIO INPUTS

Each audio inputs have a 3.5 mm jack connector and/or a 5-pins MCO connector.
• 3.5 mm jack connector
The COMPUTER 1, COMPUTER 2, C.VIDEO 1 and S.VIDEO 1 inputs are equipped with this audio connector. This
connector allows to connect only UNBALANCED audio source. Connect your UNBALANCED audio sources as
follow:
• 5-pins MCO female connector
The C.VIDEO 1, C.VIDEO 2, S.VIDEO 1, S.VIDEO 2, and RGB/YUV inputs are equipped with this connector. This
connector allows to connect BALANCED or UNBALANCED audio inputs. Connect your audio sources as follow:
4-8. AUDIO OUTPUTS
The audio output is provided with a RCA(x2) connectors and a 5-pins MCO female connector. The RCA connectors allow
to connect only UNBALANCED audio systems, and the 5-pins MCO female connector allows to connect BALANCED or
UNBALANCED audio systems.
PAGE 12
is equipped with a 5 BNC connectors output. If your display device is equipped with an HD 15
can provide an RGBHV (H & V Separate Sync.) or an RGB/S (Composite Sync.) output signal. If
SMART FADE™
and

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Smart cut 2S-cut 2

Table des Matières