Quattro-Fx Front Panel Description - Analog way OCTO-FX2 Manuel Utilisateur

²
OCTO / QFX402

1-7. QUATTRO-FX FRONT PANEL DESCRIPTION

Fn:
EFFECT PRESET :
INPUT SELECTION:
FREEZE :
LOGO:
CONTROL
EXIT - MENU:
ENTER:
Secondary function selection button.
Selection of the CUT, FADE & TITLE effects.
• Selection of the 4 input sources: 1 to 4.
• Selection of the 4 frames: F1 to F4.
NOTE: -Frame selection can be used only when Fn is activate (LED blinking quickly).
-The source/frame displayed onto the output is indicate by a turn ON LED.
• A long push (1 second) on the selected input button allows to active the BLACK
function. A black screen is displayed onto the corresponding output. A short push on the
same button allows to inactive this function.
Freeze the output (the blinking LED indicates the FREEZE is active).
Allows to display logo onto the output.
NOTE: Logo display can be used only when Fn is activate.
Allows to scroll thru the different menus (in Control mode).
Switches between Status and Control mode.
Validates a selected item.
Chapter 1 : INTRODUCTION (continued)
ANALOG WAY
PAGE 11