Octo² Rear Panel Description - Analog way OCTO-FX2 Manuel Utilisateur

Chapter 1 : INTRODUCTION (continued)
²
1-8. OCTO REAR PANEL DESCRIPTION
100-250 VAC, 1A, 50-60 Hz: AC power inlet.
O / I:
IP/LAN:
RS-232:
7 UNIVERSAL COMPUTER & TV/HDTV INPUTS:
1:
2 to 6:
7:
NOTE: All the universal inputs accept the following video source: Composite Video, S-Video, SD-YUV, RGBHV,
RGBS, RGsB &HD-YUV (HDTV)
DISPLAY OUTPUTS:
DVI:
ANALOG:
AUDIO:
1 & 2:
3 to 6:
7:
AUX:
OUT:
Trigger +12 V:
PAGE 12
AC power switch (O = OFF, I = ON).
LAN communication port on a RJ45 connector (optional).
RS-232 communication port on a DB9 female connector.
Universal (computer and video) input on a DVI-I female connector.
NOTE: This input accept analog & digital Computer source.
Universal (computer and video) inputs on a HD15 female connector.
Universal (computer and video) input on HD15 and 2xBNC female connectors.
Digital & analog output on a DVI-I female connector.
Analog output on a HD15 female connector.
Unbalanced stereo audio input #1 & #2 on jack 3.5 female connectors.
Unbalanced stereo audio input #3 to #6 on MCO male connectors.
Balanced stereo audio input #7 on a MCO male connector.
Balanced stereo auxiliary audio input on a MCO male connector.
Stereo audio output (balanced & unbalanced) on a MCO male connector.
A room (+ 12 Vdc trigger) command (3.5 mm jack female), allows to control external
functions such as up/down screen, lighting...
²
OCTO / QFX402