Octo² Front Panel Description - Analog way OCTO-FX2 Manuel Utilisateur

Chapter 1 : INTRODUCTION (continued)
²
1-6. OCTO FRONT PANEL DESCRIPTION
²
• OCTO-FX
(OFX803)
²
• OCTO-FADE
²
• OCTO-PLUS
(OCP803)
INPUT #8:
AUDIO L+R:
COMPUTER/TV/HDTV: Computer (RGBHV, RGBS or RGsB) or video (SDTV or HDTV) source on a HD15
S.VIDEO:
C.VIDEO:
Fn :
(OFX803 only)
BLACK
(OFD803 only)
EFFECT PRESET :
(OFX803 & OFD803)
FREEZE :
LOGO
(OFX803 only)
INPUT SELECTION:
CONTROL
EXIT - MENU:
ENTER:
PAGE 10
(OFD803)
Universal (computer and video) input. This input accepts the following sources:
Audio stereo source on jack 3.5 female connector.
female connector.
S.VIDEO (Y/C) source on 4-pin mini DIN 4 female connector.
Composite Video (PAL, NTSC...) source on a RCA female connector.
Secondary function selection button.
: Allows to display a black screen.
Selection of the CUT, FADE & TITLE effects.
Freeze the output (the blinking LED indicates the FREEZE is active).
: Allows to display logo onto the output.
NOTE: Logo display can be used only when Fn is activate.
• Selection of the 8 input sources: 1 to 8.
• Selection of the 4 frames: F1 to F4
NOTE: -Frame selection can be used only when Fn is activate (LED blinking quickly).
-The source/frame displayed onto the output is indicate by a turn ON LED.
• A long push (1 second) on the selected input button allows to active the BLACK
function. A black screen is displayed onto the corresponding output. A short push on the
same button allows to inactive this function.
Allows to scroll thru the different menus (in Control mode).
Switches between Status and Control mode.
Validates a selected item.
.
(OFX803 only)
²
OCTO / QFX402
ANALOG WAY
ANALOG WAY
ANALOG WAY