Analog way OCTO-FX2 Manuel Utilisateur page 30

Chapter 5 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued)
• If the selected input type is a COMPUTER signal the IMAGE MENU displays:
4-1 [Centering] + ENTER.
Adjust automatically the image in the centering pattern.
4-2 [Pos. settings] + ENTER.
Select one of the following functions with
4-2-1 [H position] + ENTER.
Adjust the Horizontal position with
4-2-2 [V position] + ENTER.
Adjust the Vertical position with
4-2-3 [H size] + ENTER.
Adjust the Horizontal size with
4-2-4 [V size] + ENTER.
Adjust the Vertical size with
4-3 [Aspect in] + ENTER.
Select the Aspect Ratio of your input source with
• [4/3 standard]: 4/3 input format.
• [16/9 letterbox]: Letterbox input format.
• [WS anamorphic]: Widescreen Anamorphic input format (video) or 16/9 input format (computer).
4-4 [Aspect out] + ENTER.
Select one of the following output aspect ratio with
• [Standard]:
• [Crop]:
• [Full Screen]: The image is stretched to fill the screen. The aspect ratio is not preserved.
• [Zoom]:
4-5 [Black level] + ENTER.
Adjust the black level with
4-6 [Color] + ENTER.
Select a color (Red, Green, or Bleu) with
4-7 [Optimize] + ENTER.
Select an item with
• [Clock]: Manual adjustment of the pixel clock.
• [Phase]: Manual adjustment of the pixel phase.
4-8 [Preset] + ENTER.
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with
ENTER.
NOTE: If the selected input is the reference computer input, the available adjustments are: Black level & Color.
PAGE 30
+ ENTER.
The entire image and the aspect ratio are preserved.
The image is zoomed without deformation to fill the screen, but some borders of the image will
be cropped. The aspect ratio is preserved.
The image can be zoomed, cropped and stretched at your convenience.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER and adjust the level with
²
OCTO / QFX402
+ ENTER.