Rear Panel Description - Analog way Di-Ventix DVX8022 Manuel Utilisateur

Chapter 1 : INTRODUCTION (continued)

1-7. REAR PANEL DESCRIPTION

100-240 Vac 3A 50-60Hz:
O / I :
INPUTS
1 to 8:
DVI INPUT:
SDI / HDSDI:
REMOTE IP/LAN:
HDSDI OUTPUTS:
MAIN / 1
OUTPUT
ANALOG:
DVI:
PREVIEW /
OUTPUT
ANALOG:
DVI:
REMOTE CONTROL RS-232: RS-232 communication port & 3 tally outputs on DB9 female connector.
AUDIO (OPT-iX-A option)
IN 1 to IN 8:
AUX:
MAIN / OUT 1:
PRELIST / OUT 2:
PAGE 10
IEC standard power connector.
Power switch (O = OFF, I = ON)
8 Universal analog Computer & Video Inputs. Each of the 8 inputs can accept both
COMPUTER sources (RGBHV, RGBS, and RGsB (SOG) signals), standard
TV/VIDEO sources (Composite video, S.VIDEO, Component (YUV), RGBS &
RGsB (SOG)), and HDTV sources.
The inputs 1 to 4 are provided with 5 BNC female connectors, and the inputs 5 to 8
are provided with a HD15 female connector.
DVI (digital visual interface) input on a DVI connector.
2x SD/HD-SDI inputs on a BNC connector.
NOTE: The 2 SD/HD-SDI and the DVI inputs can be assigned to any of the 8
inputs.
LAN communication port on a RJ45 connector.
MAIN & PREVIEW HD-SDI outputs on BNC connectors.
NOTE: The HD-SDI outputs can not be used simultaneously with the ANALOG
and DVI outputs.
2 MAIN analog outputs for the MAIN display devices on HD15 female connectors.
Digital (DVI) MAIN output on DVI-I female connector.
2
2 PREVIEW analog outputs for the PREVIEW display devices on HD15 female
connectors.
Digital (DVI) PREVIEW output on DVI-I female connector.
Optional audio inputs.
Auxiliary input for mixing with the diffused source
MAIN audio output.
PRELIST audio output.
Di-VentiX™
Figure 3