Analog way Di-Ventix DVX8022 Manuel Utilisateur page 58

Chapter 6 : Di-VentiX & REMOTE KEYPAD SCREEN DESCRIPTION (continued)
6-5. FRONT PANEL SCREEN FUNCTIONS DESCRIPTION (continued)
6-x-4 [shadow title]: Same function as [title] but a shadow bar appears at the bottom of the image. This function
allows increasing the readability of the text on bright images.
Select the [duration] of the transition with
• [holding]: The text appears after pushing on the TAKE button, and will be removed only by a second
push on the TAKE button.
• [3s]: 3 seconds transition.
• [5s]: 5 seconds transition.
• [custom]: Select a duration from 0.5 second up to 25 seconds by 0.5 second steps.
Select the [size] of the shadow bar with
Select the vertical [position] of the shadow bar with
Select the [intensity] of the shadow with
NOTE: The opening & closing animations available with this effect are: CUT, FADE, Horizontal slides.
6-x-5 [hor. wipe]: Allows to switch the pre-selected input onto the MAIN output with a horizontal wipe effect.
First select a horizontal wipe effect with
• [From left]: From left to right.
• [From right]: From right to left.
• [to center]: From sides to center.
• [from center]: From center to sides.
Then select the duration of the transition.
• [1s]: 1 second transition.
• [3s]: 3 seconds transition.
• [5s]: 5 seconds transition.
• [custom]: Allows selecting a duration from 0.5 second up to 25 seconds by 0.5 second step.
6-x-6 [vert wipe]: Allows to switch the pre-selected input onto the MAIN output with a vertical wipe effect.
First select a vertical wipe effect with
• [up]: From bottom to top.
• [down]: From top to bottom.
• [to center]: From sides to center.
• [from center]: From center to sides.
Then select the duration of the transition.
• [1s]: 1 second transition.
• [3s]: 3 seconds transition.
• [5s]: 5 seconds transition.
• [custom]: Allows selecting a duration from 0.5 second up to 25 seconds by 0.5 second step.
6-x-7 [Square wipe]: Allows to switch the pre-selected input onto the MAIN output with a horizontal & vertical
square wipe.
First select a horizontal wipe effect with
• [to center]
• [from center]
Then select the duration of the transition.
• [1s]: 1 second transition.
• [3s]: 3 seconds transition.
• [5s]: 5 seconds transition.
• [custom]: Allows selecting a duration from 0.5 second up to 25 seconds by 0.5 second step.
PAGE 58
+ ENTER between:
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER between:
+ ENTER between:
+ ENTER between:
Di-VentiX™