Analog way Di-Ventix DVX8022 Manuel Utilisateur page 24

Chapter 3 : OPERATING MODE (continued)
3-1. OPERATING WITH THE REMOTE CONTROL SOFTWARE (continued)
3-1-3. OPERATING IN MIXER MODE (continued)
Titling a PIP (Double PIP effect):
• Store a frame: Connect to the Di-VentiX the source providing the frame to be stored, and select the source. Click
on STORE and select a frame memory (Up to 6). The memorization starts and will take about 2 minutes.
• Create the text to be displayed with a computer, using software such as PowerPoint®: the text should be bright
(yellow, white...) on a black background.
• Pre-select the source needed for the PIP and display it onto the MAIN output though a transition effect.
• Pre-select the source used to display the text file created above.
• Select an EFFECT key. Then click on the Effect tab and select Double PIP type. Then select the holding
duration.
• Click on the Background and Inlay button and select a frame.
• Click on TAKE: the frame stored is displayed onto the MAIN output together with the 2 PIP.
• Adjust the position & size of the main PIP.
• Adjust the Opacity of the preview PIP: this will make the black part of the PIP more or less transparent to the
image behind. The opacity can be adjusted from 0 to 100%.
• Adjust the position & size of the preview PIP to display the text onto the PIP and/or background frame.
• As required, adjust the position & size of the mask of the preview PIP. The mask adjustment allows limiting the
text area of the preview source.
Frame store
• AUDIO ADJUSTMENTS
Click on the Audio tab, and do for each AUDIO output the following adjustment:
Adjust the master volume.
Select the mono or stereo audio mode.
Select an AUDIO input (breakaway mode) or automatic (auto follow mode):
- auto follow = the audio switching follows automatically the video switching.
- breakaway = the selected audio input is permanently diffused.
For each audio input, adjust the level (audio level) and the balance (audio balance).
IMPORTANT: If the auxiliary audio input (AUX) is used, don't forget to activate it (AUX input = ON).
PAGE 24
TITLE
Title source (Preview)
TITLE
DISPLAYED IMAGE
Figure 27: Titling a PIP.
Di-VentiX™
PIP source (MAIN)