Analog way Di-Ventix DVX8022 Manuel Utilisateur page 141

Di-VentiX™
COMMAND RESPONSE
COMMANDE RÉPONSE
SOFT-EDGE BLENDING COMMANDS (CBD-UP option) / COMMANDES DE SOFT-EDGE BLENDING (option CBD-UP)
eS EDGS
eA EDGA
eP EFA
eC PEDG
eT EDGT
eV EDGV
LK LUTC
K L
eJ EDGR
eK EDGG
eL EDGB
eH EDGH
el EDGI
AUDIO COMMANDS (OPT-iX-A option) / COMMANDES AUDIO (option OPT-iX-A)
RC ACH
rc ach
RO AMOD
ro amod
RV AVOL
rv avol
RM AMUT
rm amut
RS AMNO
rs amno
RL ALVL
RB ABAL
RX AXMU
rx axmu
NOTE: (M) = MAIN output (sortie MAIN).
(P) = PREVIEW output (sortie PREVIEW).
COMMAND DESCRIPTION
DESCRIPTION DE LA COMMANDE
Covering size.
Device position in the screen.
Effect position in the screen.
Extended input selection (works with
PC command).
Softedge type.
Softedge activation.
LUT loading control.
-Values to set in the LUT (if LUTC=3)
-Softedge curve selection (if LUTC=9
or 10).
Black level: red adjustment.
Black level: green adjustment.
Black level: bleu adjustment.
Black area: right adjustment
Black area: left adjustment
Audio source selection of the MAIN.
Audio source selection of the PRELIST
output.
Audio mode of the MAIN output.
Audio mode of the PRELIST output.
Mater volume of the MAIN output.
Mater volume of the PRELIST output.
Mute of the MAIN output.
Mute of the PRELIST output
Mono/stereo mode of the MAIN output. Rd/Wr
Mono/stereo mode of the PRELIST.
Audio level (works with PC command) Rd/Wr
Audio balance (works with PC)
Auxiliary source to MAIN.
Auxiliary source to PRELIST.
TYPE
MIN MAX
Rd/Wr 0 255
bits 0 to 3: device position.
Rd/Wr 1 255
bits 4 to 7: number of devices.
bits 0 to 3: device position.
Rd/Wr 0 255
bits 4 to 7: number of devices.
Rd/Wr 0 1 0 = not extended
0 = horizontal
Rd/Wr 0 1
0 = inactive
Rd/Wr 0 1
1 = reset the LUT.
3 = LUT loading (softedge curve).
Rd/Wr 0 10 5 = linear softedge.
9 = softedge writing LUT selection.
10 = softedge displayed LUT selection.
if LUTC = 3: 0 to 255.
Rd/Wr 0 255 if LUTC = 9 or 10: 0 or 1.
Rd/Wr 0 31
Rd/Wr 0 31
Rd/Wr 0 31
Rd/Wr 0 2047
Rd/Wr 0 2047
Rd/Wr 1 8 1 = audio source #1.... 8 = audio source #8.
Rd/Wr 1 8 1 = audio source #1.... 8 = audio source #8.
Rd/Wr 0 1 0 = auto follow
Rd/Wr 0 1 0 = auto follow
Rd/Wr 0 255
Rd/Wr 0 255
Rd/Wr 0 1 0 = mute OFF
Rd/Wr 0 1 0 = mute OFF
0 1 0 = stereo
Rd/Wr 0 1 0 = stereo
0 64 0 = minimum
Rd/Wr 0 64 0 = left to maximum 64 = right to maximum
Rd/Wr 0 1 0 = used
Rd/Wr 0 1 0 = used
Rd/Wr = Read and write command / Commande de lecture et d'écriture.
Rd = Read only command / Commande de lecture uniquement.
APPENDIX A / ANNEXE A
VALUE /VALEUR
DESCRIPTION
1 = extended.
1 = vertical.
1 = active.
1 = breakaway
1 = breakaway
1 = mute ON
1 = mute ON
1 = mono
1 = mono
1 = maximum
1= unused.
1= unused.
PAGE 141