Troubleshooting - AVG DAKOTA-AVD-306PSB Instructions D'installation Et Guide De L'usager

TROUBLESHOOTING

Fault
Light on, but motor
does not work
Light does not work,
motor does not work
Oil leakage
Lights not working
Insufficient suction
The Range hood is
leaning
NOTE:
Any electrical repair performed on this unit must comply with local, provincial and federal laws. Please
contact customer service before undertaking any action. Always unplug the hood from the power source
when servicing or maintaining.
Possible Cause
Fan switch turned off
Fan switch failed
Motor failed
House fuses blown
Power cord loose or disconnected
check valve and the outlet are not
tightly sealed
Leakage from the connection of
exhaust duct and cover
Broken/Faulty LED lamps
The distance between the range
hood and the cooking surface is
too high
The fixing screw not tight enough
Solution
Select a fan switch position.
Contact service center.
Contact service center.
Reset/Replace fuses.
Refit cord to power outlet.
Switch power outlet on.
Take down the check valve and seal
with sealant.
Take exhaust duct down and seal.
Replace LED lamps as per
instructions.
Reinstall the range hood to the
correct distance.
Tighten the hanging screw and level
the hood correctly.
27