AVG DAKOTA-AVD-306PSB Instructions D'installation Et Guide De L'usager page 22

The Lamp button
The Lamp button
2.
When you press the lamp button
the lights will turn off. You can also press the lamps button to close the lights only, this will keep the
backlight on and the fan working at low speed.
Increase speed button
3.
Press the
low speed.
You can change the speed by pressing the
working speed from 1 to 5.
Decrease speed button
4.
When you press decrease
current working speed at each press. If you press the decrease button at low Speed (1) the hood and the
lights will shut off.
5. Timer button
The timer button
5 minutes and can be repeated. When the time is up, the hood and the lights will turn off.
If you adjust the speed when the timer is set,the timer will recalculate the working time.
NOTE:
Any electrical repairs made to this appliance must conform to your local, provincial
and federal laws. Please contact the service center before undertaking any repairs. Always
disconnect the unit from the power source before servicing or maintaining.
can be operated without pressing the power button.
(increase) button the backlight of button will turn on and the hood will start to work at
button the hood will decrease speed (5 to 1) and the display will show
will only work when the motor and lights are "on" . The timer setting is pre set at
the backlight and the lights will turn on. Press one more time and
successively, the LED screen will show the current
22