Mounting the Bar and Chain
(Quick chain tensioner)
1
3
2
:
Pull out the hinged clip (1) so that it
snaps into position.
:
Turn the wingnut (2) counterclock-
wise until it hangs loose in the
sprocket cover (3).
:
Remove the sprocket cover.
MS 260
4
:
Remove the tensioning gear (4)
and turn it over.
5
:
Unscrew the nut (5).
4
7
8
:
Position the tensioning gear (4)
against the guide bar (6) so that the
stud (7) projects through the upper
hole and the short guide peg (8)
locates in the lower hole.
5
:
Screw the nut (5) on to the stud as
far as stop.
English
6
27