Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
20
Technical Data
Circular table saw .................................................................................................................................. TK 2400 P
Art. No .................................................................................................................................................................................................... 55167
Service connection ..................................................................................................................................................230 V~ 50 Hz
Rated input ............................................................................................................................................................................1500 w
Idle speed ........................................................................................................................................................................5700 min
Saw blade dia. x hole dia ...................................................................................................................................... 250 x 30 mm, HM 24 z
cutting depth max. 90° ......................................................................................................................................................75 mm
cutting depth max. 45° ......................................................................................................................................................48 mm
weight .........................................................................................................................................................................................21 kg
Dimensions LxwxH (in mm) ...................................................................................................................446 x 640 x 850 mm
Noise and Vibration Information
Sound pressure level L
Guaranteed sound power level L
wear ear protectors!
Measured according to EN ISO 11202:1995/Ac:1997, under load, Uncertainty K=3 db (A)
1)
instructions before using the appliance. Abide by all
the safety measures stated in the service manual. Act
responsibly toward third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
The circular saw is only intended to cut wood and
wood like products.
Do not use this product in any other way as stated for
normal use.
Not observing general regulations in force and
instructions from this manual does not make the
manufacturer liable for damages.
Power tool description
1.
Saw disc cover
2.
Saw disc
3.
Mitre cut stop
4.
Parallel stop clamping lever
5.
Scale
6.
base
7.
Saw disc height readjustment
8.
Saw disc turning readjustment
9.
Emergency switch
10.
Turning readjustment lock lever
11.
Magnifying glass
12.
Mitre cut stop
13.
Exhaust hose
14.
Exhaust throat
.................................................................................................................................................... 87,3 db (A)
1), 2)
pA
.................................................................................................................................. 99,5 db (A)
2)
wA
Read and understand the operating
15.
cutting wedge
16.
Overload protection
17.
scale
Requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
because wrong using of the appliance can be risky,
only competent persons are allowed to operated it.
Operator must be trained properly concerning adjust-
ment, operation and appliance using.
Qualification: : Apart from the detailed instructions
by a professional, no special qualification is necessary
for appliance using.
minimum age: : Persons over 18 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Training: : Using the appliance only requires corre-
sponding training by a professional or the Operating
Instructions. No special training is necessary.
The operator is responsible for accidents or risks to
third parties.
-1
Publicité
