Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NOTE: A full grass bag will reduce the product's performance.
Switch the motor off and wait that the blade has come to a complete
stop before removing the grass bag!
After Use
1.
Switch the product off, disconnect the safety key from the tool and remove the
battery pack and let it cool down.
2.
Check, clean and store the product as described below.
Maintenance
WARNING!
from the power supply and let the product cool down before
performing inspection, maintenance and cleaning works.
- Keep the underbody and cutting blade clean and free of debris. Remove
clippings from the discharge chute.
- Check all nuts and bolts for tightness before operation. After prolonged
use, especially in sandy soil conditions, the cutting blade will become
worn and lose some of its original shape. The cutting efficiency will be
reduced and the cutting blade should be replaced.
- Lubricate the cutting blade after each use to prolong the life span of
the blade and product. Apply light machine oil along the edge of cutting
blade.
Always switch the product off, disconnect it
87
Publicité
Table des Matières
