inventiv INV B4037 P2 Mode D'emploi page 87

Inserting the mulch kit(19)
WARNING !
Insert/remove the mulch kit only with the motor switched off and
when the mower blade has come to a standstill.
1. Open the rear flap (4) and hold it in position.
2. Remove the grass bag(9) if necessary
3. Insert the mulch kit(19) into the rear discharge .Ensure the pins under the mulch
kit snaps into holes of deck.
Removing the mulch kit
1. Lift the rear flap
2. Lift the mulch kit to release and remove the mulching kit.
NOTE: If the mulch kit is not locked into position, both the mulch insert
and the mower blade may be damaged.
Grass bag full indicator
While there is free space remaining in the collection box, the airflow will push open the
indicator.
Once the collection box is full of grass, airflow will cease and the indicator will close.
Risk of injury!
19
86