inventiv INV B4037 P2 Mode D'emploi page 65

Tondeuse sans fil à batterie lithium-ion
Masquer les pouces Voir aussi pour INV B4037 P2:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Charging
1. Recharge only with the charger specified by the
manufacturer. Do not use the original charger on
other li-ion batteries or on any other type of battery
as this can increase the risk of fire or explosion.
2. Check the battery charger, cable and plug before
each use. Do not use the battery charger if
damaged. Do not open the battery charger yourself;
charger must be repaired by qualified personnel
using original spare parts.
3. The charger is designed to use a standard
household 220-240 V~ 50Hz power source, ensure
that the plug matches the outlet.
4. Never modify the plug in any way, this will reduce
the risk of electric shock.
5. Do not abuse the cord of charger. Never use the
cord for carrying, pulling or unplugging the charger.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
6. Make sure the charger cord is situated so that it will
not be stepped on, tripped over or get damaged.
7. Keep the battery charger clean. Contamination can
increase the risk of electric shock.
8. Protect the battery charger from rain and moisture.
If water accesses the battery charger there is an
increased risk of electric shock.
9. Battery will heat up whilst charging. To reduce
64

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Inv b4044 p2b

Table des Matières