Using The Device For The First Time; Dab Mode; Operating The Radio; Selecting A Station - PERFECTPRO ROCKPRO Manuel De L'utilisateur

Masquer les pouces Voir aussi pour ROCKPRO:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING THE DEVICE FOR THE FIRST TIME

1. Place the radio on a flat surface.
2.
Carefully extend the antenna located on the top of the radio. Adjust the antenna so
it is vertically extending above the radio.
3.
Plugging the AC power cord into the AC socket. The radio will start up and
the display will show the Perfect Pro logo for a few seconds. Then the radio will
automatically perform an auto scan of the Band III DAB channels and the FM band
in the back ground.
4. When the scan is completed, the 40 strongest FM stations and the first 40 DAB
stations will be stored as presets. The radio will switch to standby with the updated
clock and date showing on the display.
5.
If no signals are found, the clock will not be updated. It may be necessary to
relocate the radio to a position giving better reception.

DAB MODE

Operating the radio

1.
Carefully extend the antenna. Press the ON/OFF button to switch on the radio.
2.
Select DAB by pressing the SOURCE button.
3. The first station in the list of stations found will be played. The display will show
the station name. If the radio has been used before, the last used station will be
selected.
4.
If no DAB signals are detected, "No stations available" will be displayed. It may
be necessary to relocate the radio to a position with better reception. You should
then carry out an auto scan to find stations, please refer to the section "Find new
stations - DAB".

Selecting a station

1.
Press the ON/OFF button to switch on the radio.
2.
The display shows the name of the radio station currently selected.
3.
Rotate the TUNING/SEEK/SELECT knob to show the available station list.
4.
Rotate the TUNING/SEEK/SELECT knob to scroll through the list to find the
desired station, press the TUNING/SEEK/SELECT knob to select the station.
Note: If after selecting a station the display shows "No stations available", it may be
necessary to relocate the radio to a position with better reception.

Secondary services

1.
Certain radio stations have one or more secondary services associated with them.
If a station has a secondary service associated with it, then the secondary service
will appear immediately after the primary service as you turn the TUNING/SEEK/
SELECT knob.
GB
8

Publicité

Table des Matières
loading

Table des Matières