Stihl MS 170 Notice D'emploi page 18

Masquer les pouces Voir aussi pour MS 170:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
Plunge cut the felling cut
N
Make the felling cut up to the
N
hinge (4)
Do not cut into the hinge
Make the felling cut up to the
N
stabilizing strap (5)
Do not cut into the stabilizing strap
Set the felling wedge (6)
N
Shout a second warning immediately
before the tree falls.
Cut through the stabilizing strap,
N
horizontal level with the felling cut,
with arms fully extended
Felling Cut with Holding Strap (Leaner)
A) Thin trunks
Implement this felling cut when the trunk
diameter is smaller than the cutting
length of the chainsaw.
16
6.
Plunge cut the guide bar into the
N
trunk until it exits on the other side
Make the felling cut (E) towards the
N
hinge (1)
Cut horizontally
Do not cut into the hinge
Make the felling cut towards the
N
holding strap (2)
Cut horizontally
Do not cut into the holding strap.
1.
2.
Shout a second warning immediately
before the tree falls.
N
With outstretched arms, cut through
the holding strap at a downward
angle from outside.
MS 170, MS 170 C, MS 180, MS 180 C

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Ms 180

Table des Matières