Shroud; Cleaning The Air Filter; Engine Management - Stihl MS 170 Notice D'emploi

Shroud

Removing the shroud
Use a suitable tool to open the catch
N
by turning it 90° to the left
Lift off the shroud
N
Refitting the shroud
Install parts in reverse order.
MS 170, MS 170 C, MS 180, MS 180 C

Cleaning the Air Filter

If there is a noticeable loss of engine
power
Simultaneously press the throttle
N
trigger lockout and throttle trigger
and set the Master Control lever to
cold start l
Clean away loose dirt from around
N
the filter
Remove the shroud – see "Shroud"
N
Pull the filter upwards to remove
N
Knock out the filter or blow it clear
N
with compressed air from the inside
outwards - do not wash
Do not clean fleece filters with a brush!
If the filter cannot be cleaned or is
damaged, replace the filter
Reinstall air filter
N

Engine Management

Exhaust emissions are controlled by the
design of the engine and components
(e.g. carburation, ignition, timing and
valve or port timing).
English
33