Britax Roundabout 55 Guide D'utilisation page 38

Care and Maintenance
Replacing the Cover
Fit the child seat cover around
1
the child seat shell.
Attach the plastic hooks to the
2
bottom edge of the child seat.
Pull the buckle through the
3
slot in the cover.
* Ensure that the buckle is
through the correct cover slot
for the buckle position.
Feed each harness strap
4
through the desired harness
slots in the cover and shell to
the back of the child seat.
Nest the harness straps by
5
inserting the right strap loop
into the left strap loop.
Before reattaching the harness
6
straps to the yoke, hold the
harness yoke as shown, and
ensure that the adjuster strap
attached to the yoke is not
twisted.
36
2
Adjuster
Strap
1