Britax Roundabout 55 Guide D'utilisation page 29

1 Firmly press the lower connectors
onto the adjacent lower anchors.
A click confirms attachment.
Verify that the lower connector
strap is not twisted.
TIP: You may need to turn the back
of the child seat toward you for
easier access to the vehicle lower
anchors.
NOTE: If a click is not heard when
connecting either lower connector, the
lower connector strap may be twisted,
or there may be debris in the lower
connector. Correct either situation
before continuing with the installation
process.
2 Push the child seat down while
pulling each lower connector strap
to tighten.
3 Attach the Versa-Tether to a
designated anchor (see vehicle
owner's manual) and remove slack
(see pages 17 – 19).
4 Store excess webbing in the
elastic strap.
Checklist
Check that all connections are secure.
Check that the lower connector straps are not twisted.
Check that no more than 20% or 7.6 cm (3 inches) of the base hangs
over the edge of the vehicle seat.
Check that the child seat cannot be moved front to back or side to side
more than 2.5 cm (1 in.) at the belt path. If the child seat is not secure,
repeat installation or use a different seating location.
Check that any excess Versa-Tether
vehicle and secured in the elastic strap.
Forward-Facing Installation
®
webbing is contained within your
1
2
3
4
27