Specifications; Plug Configurations; Electrical Rating Chart; Dimensions - Hatco KSW-1 Manuel D'installation Et D'utilisation

English

Plug Configurations

Units are supplied from the factory with an electrical cord and
plug. Plugs are supplied according to the application.
WARNING
ELECTRIC SHOCK HAZARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage,
size, and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install proper voltage and size electrical receptacle.

Electrical Rating Chart

Model
KSW-1
KSW-2
KSW-3

Dimensions

Model
KSW-1
KSW-2
KSW-3
* Overall Height (D) is with bottle installed.
Front View
Form No. KSWM-0120
Voltage Watts
120 V 202 W
120 V 404 W
120 V 607 W
Width Depth
(A) (B)
6-3/16" 8-13/16"
(156 mm) (223 mm)
10-3/4" 8-13/16"
(272 mm) (223 mm)
15-11/16" 8-13/16"
(397 mm) (223 mm)
A
C
E
Top View
NOTE: Receptacle not supplied by Hatco.
Amps Plug Configuration
1.7 A NEMA 5-15P
3.4 A NEMA 5-15P
5.1 A NEMA 5-15P
Unit Overall
Height (C) Height (D)*
7-7/8" 10-7/8"
(200 mm) (276 mm)
7-7/8" 10-7/8"
(200 mm) (276 mm)
7-7/8" 10-7/8"
(200 mm) (276 mm)
B
F
Side View
Ø = 3-11/16" (94 mm)
5

SPECIFICATIONS

Plug Configurations
Unit Weight
4 lbs. (2 kg)
7 lbs. (3 kg)
11 lbs. (5 kg)
Footprint Footprint
Width (E) Depth (F)
5-13/16" 7-3/4"
(131 mm) (196 mm)
9-11/16" 7-3/4"
(246 mm) (196 mm)
14-11/16" 7-3/4"
(372 mm) (196 mm)
9-13/16"
(249 mm)
D
Sauce Bottle
Model KSW-3