Progress PBN1320 Notice D'utilisation page 27

• To clean the door gasket, refer to the
general information about cleaning.
Removing the shelf supports
1
Installing the shelf supports
Install the shelf supports in the opposite se-
quence.
The rounded ends of the shelf supports
must point to the front.
Oven ceiling
You can remove the grill to clean the oven
ceiling more easily.
Warning! Deactivate the appliance
before you remove the grill. Make sure
that the appliance is cold. There is a
risk of burns.
2
Shelf supports
You can remove the shelf supports to clean
the side walls.
1. Pull the front of the shelf support away
from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove it.
1. Remove the screw which holds the grill.
For the first time, use a screwdriver.
2. Carefully pull the grill down.
3. Clean the oven ceiling with a soft cloth
with warm water and a cleaning agent,
and let it dry.
4. Install the grill in the opposite se-
quence.
Warning! Make sure that the grill is
correctly installed and that it does not
fall down.
progress 27