Publicité
2. To increase or decrease the stimulation
level of all programmed therapy areas,
press either p or q from the Level
screen.
3. To change the stimulation level of just
one area:
a) From the Level screen, press
many times as necessary to find the
desired area by name or number.
b) Press p or q to make the change.
4. To activate a stimulation program:
a) Press
b) From the Program screen press
many times as necessary to highlight
the desired program.
c) Press p to activate the selected
program.
as
"
To save the new setting in a program,
return to the Program screen, select the
intended program number, and press q.
This will replace the existing program with
the new settings.
Accessing Patient Options
Pulse Width (If provided by physician)
1. Press and hold
activate the Pulse Width Area 1 screen.
2. Press
"
cycle to the area you want to adjust, then
press p or q to increase or decrease
the Pulse Width.
Accessing Patient Options
P
from the Level screen.
from the Level screen to
"
(normal press) as necessary to
Physician Trial Kit
9055930-005 Rev A 5 of 86
P
as
Publicité
