Use - ETNA ESM223RVS Mode D'emploi

USE

Prior to first use
EN 8
• Open the door, remove the packaging and check the microwave
for damage. Don't install the microwave if it is damaged,
contact your supplier.
• Remove the protective film from the casing.
• Clean the oven interior and accessories with a damp cloth.
Don't use any abrasive cleaner or strong-smelling cleaning
products.
• Place the guiding ring in the middle of the oven interior.
Place the turntable on the guiding ring with the opening for the
drive shaft facing downwards.
Please note
The microwave may not be used without the guiding ring and
turntable.
• Test that the microwave works properly: place a glass of
water in the oven interior and turn on the microwave for one
minute on the highest setting (press twice on the start button).
Afterwards the water should be hot.