Faults / Technical Data - ETNA ESM223RVS Mode D'emploi

FAULTS / TECHNICAL DATA

Technical data
EN 20
If you are uncertain about whether your appliance is functioning
properly, this does not automatically mean there is a defect. Try
to deal with the problem yourself first by checking the points
mentioned below: If the recommendations below do not solve your
problem, call our service department.
• Is the plug in the socket?
• Is the door closed properly?
• Is the fuse in the fuse box faulty?
• Are the power settings and times set properly?
• Are there objects in the microwave that shouldn't be there?
• Did you use the correct kitchen utensils?
• Are the ventilation openings blocked?
• Has the food been defrosted sufficiently?
• Did you turn over or stir the food during preparation?
• Is the child lock activated?
Sparks in the microwave
If you see sparks in the microwave, turn the microwave off
immediately. Sparks can be caused by:
• metal or aluminium foil that touches the interior of the
microwave;
• aluminium foil that is not correctly covering the food (points that
stick up act as an antenna);
• metal from a closing strip or tableware with metallic edges;
• recycled paper that contains small metal particles.
The data plate indicates the total nominal load, the required voltage
and the frequency.
This appliance meets all relevant CE guidelines.
Connection
Microwave power
Volume
Diameter of turntable
Weight
230V~50Hz
800 W
23 litres
270 mm
13 kg