Safety; Connection And Repair; Safe Use - ETNA A2132HRVS Mode D'emploi

SAfEtY

Connection and repair

Safe use

• C heck the appliance for transport damage. Do not connect a
damaged appliance.
• The electrical connection must comply with national and local
regulations.
• The wall plug socket and plug should always be accessible.
• If you want to make a fixed connection, make sure that a multi-
polar switch with a contact separation of at least 3 mm is fitted
in the supply line.
• The equipment should not be connected to the network via
a multi-plug socket or extension lead, as the safe use of the
equipment can then not be guaranteed.
• WARNING: Never open the casing of the appliance. The casing
may only be opened by a service technician.
• D isconnect the electricity from the appliance before starting any
repair work.
• Defective parts may only be replaced by original parts. The
manufacturer can only guarantee that original parts meet safety
requirements.
• To avoid dangerous situations resulting from any damage to
the connecting cable, this should only be replaced by the
manufacturer, the manufacturer's service organisation or
suitably qualified persons.
• WARNING: this appliance and the accessible parts become
hot during use. Please do not touch the hot components. Keep
children younger than 8 away from the appliance unless you
can watch them continuously.
• This equipment may be used by children older than 8, as well
as by people with physical, sensory or learning difficulties or
with a lack of experience and knowledge, if they are supervised
and instructed in the safe use of the appliance and understand
the associated dangers. Children may not play with the
appliance. Children may not clean or maintain the appliance
unless supervised.
• WARNING: it is dangerous for unqualified people to carry out
repairs in which it is necessary to open the appliance's casing.
The casing protects against the release of micro-energy.
EN 7