Stop; Defrosting According To Weight; Defrosting According To Time - ETNA ESM223RVS Mode D'emploi

OPERATING INSTRUCTIONS

Stop

Defrosting according to weight

Defrosting according to time

You can stop or cancel a running programme by opening the door
or pressing the stop button. In order to start the programme again,
press the start button.
• If you want to cancel the programme entirely, press the stop
button again.
The current time appears in the display.
With this function you only need to set the weight of the food.
The defrost time appears automatically in the display when the
microwave starts.
1. Press once on the defrost button.
The display reads 'DEF1'.
2. Turn the control dial to set the weight (from 100 to 2000 grams).
In the display you will see the set weight.
3. Press the start button.
The microwave switches on and the set time counts down in
the display. The defrost symbol flashes in the display.
• For a better result, turn the dish over during defrosting.
4. Open the door; the microwave switches off.
5. Close the door after checking/turning over, press the start
button and the microwave continues further with the set
programme.
• When the set time has been reached, the current time
appears again in the display, and you will hear 5 beeps.
With this function you only need to set the defrost time of the food.
1. Press twice on the defrost button.
The display reads 'DEF2'.
2. Turn the control dial to set the defrost time (maximum 95
minutes).
The display indicates the set time.
3. Press the start button.
The microwave switches on and the set time counts down in
the display. The defrost symbol flashes in the display.
• For a better result, turn the dish over during defrosting.
EN 11