Bresser 4Cast NG Mode D'emploi page 33

• Repeat this if you wish to remove more cities from your list.
• Now, you may also press the [ ▲ ] or [ ▼ ] button to select another favourite city.
Once you have made all your changes, press the [SET] button to quit.
information window. After 4 seconds, it will go to the City-Date-Time Mode.
PERSONALIZE A PLACE NAME
• Press and hold the [SET] button for 3 seconds. "
window. Press the [ ▲ ] or [ ▼ ] button to select the country of your choosing. For example, if you
see in the information window
• Press the [SET] button to confirm the country. Assuming you have selected Germany, then the
information window will now show "
• You can now press the [ ▲ ] or [ ▼ ] button to select the city of your choosing. The city name will
be shown in the information window. Example:
is selected.
• If you now press the [MEM] button, a cursor flashes on the first position of the Information Window.
Please apply the following input commands:
KEY FUNCTION
[ ▲ ] or [ ▼ ] Selection of a letter
[SET]
<1> Accept the selected letter and jump to the next position.
OR
<2> If you have not entered any letter (in other words, if only the cursor is flashing
at the last position), confirm the entry with this key and your place will also be
included in the memory with immediate effect.
TEST
One position back in the data entry process.
• Press the [SET] button to confirm and exit.
REMARK: The place that you have selected to enter your own description will still exist under
its original name.
SET THE TIME ZONE AND LANGUAGES
• Press and hold the [SET] button for 3 seconds. "
window.
• Press the [SET] button again, then
Press the [ ▲ ] or [ ▼ ] button to adjust the time zone.
• Press the [SET] button again and the language will be shown in the information window. Press the
[ ▲ ] or [ ▼ ] button to select your desired language. There are a total of seven languages to choose
from: English, Spanish, French, Italian, Dutch, Swedish and German.
• Press the [SET] button one last time.
After 4 seconds, it will change to the City-Date-Time Mode.
• Drücken Sie die [SET] Taste, damit im Informationsfenster
Nach 4 Sekunden schaltet das Gerät in den Stadt-Datum-Zeit-Modus.
" will be shown in the information
, then you have selected "Germany".
".
" will be shown in the information
will be shown in the information window.
will be shown in the information window.
33
will be shown in the
means the city 'Frankfurt am Main'
(EXIT) angezeigt wird.
GB/IE