Getting Started - Bresser 4Cast NG Mode D'emploi

GETTING STARTED

• Insert 2 pcs. AA batteries in the weather station, and then 2 pcs. AAA batteries in the outdoor sensor.
• The weather station will automatically scan for the radio-controlled clock signal and the Meteotime
weather signal.
Attention! For fi rst time operation
and battery replacement:
First insert batteries for main
unit and then insert batteries for
remote sensor.
• The time and date signal will be received in a few minutes. Since there is a large amount of weather
information for all regions and days, the unit needs about 24 hours from the time of the initial setup
to complete the reception of all data
• After the time and date signal is being received successfully, it shows "SELECT COUNTY" and then „
" as default city in the information window. To change the Country and the City please
see the information below.
• If the unit is able to receive the Meteotime signal successfully, this Meteotime icon
the second row of the display. Otherwise, the Meteotime icon will show
means it successfully receives
today's weather information. Otherwise,
it will be
means it successfully receives
tomorrow's weather information.
Otherwise, it will be
means it successfully receives
weather information of one-day-after.
Otherwise, it will be
means it successfully receives
weather information of two-day-after.
Otherwise, it will be
means it is able to receive the
Meteotime weather signal. Otherwise,
it will be
30
will appear in
.