Numatic TTB-1620/100T Mode D'emploi page 18

Note: Ensure that no metal objects come into contact with battery terminals while the batteries are exposed.
3
Ensure the Emergency Stop button is released (Fig 3).
Fig 3
Insert key into master control on/off and turn quarter-turn clockwise to
the 'ON' position.
Ensure that the forward/reverse switch is set to forward position (Fig 4).
Select the slow speed setting.
Fig 4
Depress control handle with both hands and slowly drive machine off
of the pallet (Fig 5), this control panel has been designed with a built in
variable speed control trigger.
Fig 5
When the machine is removed and in a safe position, turn key back to
the off position (Fig 6).
Fig 6
18