Using The Device; Setting The Time And Date - Microlife BIOS Diagnostics 3AL1-3E Manuel D'instructions

3. Using the Device

This section describes how to get the maximum benefit from your 3AL1-3E blood
pressure monitor. Follow the instructions carefully to get an accurate measurement of
your blood pressure and pulse rate.

3.1 Setting the Time and Date

When you insert the batteries for the first time (see "Inserting the batteries"), the
3AL1-3E prompts you to set the current date and time. You can also adjust the date
and time at any time by pressing and holding down the
Follow these steps to set the date and time:
1. When you replace the batteries, the LCD screen starts flashing the current year
setting. Press the
button to confirm the setting.
2. Next, the screen starts flashing the month and date setting. Press the
repeatedly to set the month and date, and then press the
settings.
3. Lastly, the screen starts flashing the hour and minute values. Press the
repeatedly to set the hour and minutes and then press the
the settings.
button repeatedly to adjust the year and then press the
button for over 3 seconds.
button
button to confirm the
button
button to confirm
SYS.
mmH g
DIA.
mmH g
Pulse
/ min
MONTH-DATE
TIME