Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.8 Viewing Previously Recorded Values
The blood pressure monitor automatically stores your measurements with time
and date. It can store up to 99 measurements for each of the 2 users. When
more than 99 measurements are made, the oldest readings are deleted for that
particular user to make space for the new ones.
To view the previously stored values, press the
is displayed. The date and time of the measurement are also displayed after the
reading. Press the
recorded on the device.
Note: Blood pressure measurements are not stored when an error is
encountered during measurement.
3.9 Clearing All Values
If you are sure that you want to permanently remove all stored values, hold
down the
button (the instrument must have been switched off before hand)
until the "CL" appears and then release the button. If you do not want to clear
the values, press the
button while "CL" is flashing. Individual values cannot be cleared.
3.10 Discontinue a Measurement
If it is necessary to interrupt a blood pressure measurement for any reason (e.g.
the patient feels unwell), the
then immediately lowers the cuff pressure automatically.
3.11 Using the AC Adapter
You may also operate this monitor using the included AC Adapter (output 6V
DC/600 mA with DIN plug). Use only the included AC Adapter to avoid damaging
the unit.
1. Ensure that the AC Adapter and cable are not damaged.
2. Plug the adapter cable into the AC Adapter port on the blood pressure monitor.
3. Plug the adapter into your electrical outlet.
When the AC adapter is connected, no battery current is consumed. Note: No
power is taken from the batteries while the AC adapter is connected to the
monitor. If electrical power is interrupted, (e.g., by accidental removal of the
AC adapter from the outlet) the monitor must be reset by removing the plug
from the socket and reinserting the AC adapter connection.
button repeatedly to view all the measurements that are
button. To permanently clear the memory, press the
button can be pressed at any time. The device
button. The last measurement
SYS .
mmH g
DIA.
mmH g
Puls e
/ min
Publicité
Table des Matières
