Progress PBN1310 Notice D'utilisation page 27

1. Remove the screw which holds the
heating element. At first time, use a
screwdriver.
2. Carefully pull the heating element down.
At this time you can clean the oven ceil-
ing.
Clean the oven ceiling with a soft cloth with
warm water and cleaning agent and let it
dry.
Installing the heating element
1. Install the heating element in opposite
sequence.
Make sure that the heating element is cor-
rectly installed and it does not fall down.
Cleaning the oven door
The oven door has two panels of glass. You
can remove the oven door and the internal
panel of glass to clean it.
The oven door can close if you try to
remove the internal panel of glass be-
fore you remove the oven door.
Removing the oven door and the glass
panel
1. Open the door fully and hold the two
door hinges.
2. Lift and turn the levers on the two hing-
es.
progress 27