CST/BERGER AL Série Notice Originale page 34

Safety Notes
Read and observe all instructions.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Have the remote control repaired only
through a qualified repair person and only
using identical replacement parts. This will
ensure that the functionality of the remote control
is maintained.
Do not operate the remote control in explo-
sive atmospheres, such as in the presence of
flammable
Sparks can be created in the remote control which
may ignite the dust or fumes.
Read and strictly observe the safety warn-
ings in the operating instructions of the rota-
tional laser.
Functional Description
Intended Use
The remote control is intended for controlling
CST/berger rotational laser levels with infra-red
receivers, in indoor and outdoor use.
Product Features
The numbering of the product features refers to the
illustration of the remote control on the graphics page.
37 Outlet opening for infra-red beam
38 Remote control operation indicator
39 Standby button
40 Grade "up" button on the remote control
41 Button on the remote control for line operation
and selection of line length
42 Direction and grade button (rightwards) on the
remote control
43 Button on the remote control for clockwise rota-
tion of the rotation head
44 Battery lid latch of the remote control (on the
rear side)
45 Battery lid of the remote control (on the rear
side)
46 Serial number
800.561.8187
34 | English
Remote control
(ALHV/ALHV-G)
liquids, gases or
www.
47 Grade "down" button on the remote control
48 Button on the remote control for anticlockwise
rotation of the rotation head
49 Button on the remote control for switching off the
automatic levelling
50 Direction and grade button (leftwards) on the
remote control
51 Button on the remote control for rotation opera-
tion and selection of rotational speed
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
dusts.
Technical Data
Remote control
Article number
Working range
Batteries
Weight according to
EPTA-Procedure 01/2003
1) The working range can be decreased by unfavourable envi-
ronmental conditions (e.g. direct sun irradiation).
Please observe the article number on the type plate of your
remote control. The trade names of individual remote controls
may vary.
For clear identification of your remote control, see the serial
number 46 on the type plate.
Assembly
Inserting/Replacing the Battery
Using alkali-manganese batteries is recommended for
operation of the remote control.
The remote control is provided with batteries inserted.
Before putting into operation for the first time, remove
the safety strip in the battery compartment ("Remove
before Use").
The batteries must be replaced when operation indi-
cator 38 no longer lights up after pressing any button
on the remote control.
To open the battery lid 45, press on the latch 44 and
remove the battery lid. Insert the batteries. When
inserting, pay attention to the correct polarity accord-
ing to the representation on the inside of the battery
compartment.
.com
F 034 K69 ANA
1)
2 x 1.5 V LR06 (AA)
information@itm.co
2 610 A15 113 • 30.7.09
RC700
30 m
115 g