Güde GADH 254 P Mode D'emploi page 18

EU DECLARATION OF CONFORMITY
We,
Güde GmbH & Co. KG
Birkichstrasse 6 74549 Wolpertshausen
Germany,
hereby declare that the design of the machines below corresponds to the applicable requirements of the basic EU safety and hygiene
directives.
In case of alternation of the machine, not agreed upon by us, this Declaration will lose its validity.
Machine description:
GADH 254 P SURFACE AND THICKNESS PLANER
Art. No.
#55056
Applicable EU Directives:
2006/42/EG
2006/95EG
2004/108/EG
Applicable harmonised standards:
pr EN 61029-2-3:2007
EN 61029-1:2009
EN 55014-1:2006
EN 55014-2/A1::2001
EN 61000-3-2:2006
EN 61000-3-11:2000*
Certification body:
TÜV SÜD Product Service GmbH, Ridlerstrasse 65,
D-80339 Munich, Germany
Reference No.
Z1A09 11 41469 453
Noise:
Lwa: 106 dB (A)
Lpa: 92.9 dB (A)
Date/authorised signature:
Title of signatory:
Technical documentation:
* The device meets the EN 61000-3-11 requirements and is subject to special conditions for connection. That means that using the
device on any points of connection is inadmissible.
The device may lead to temporary voltage spikes under inappropriate system conditions.
The device has been exclusively designed to be used on points of connection not exceeding the maximum allowable system
impedance Zmax = 0.233 Ω.
As the user, you must make sure, after an agreement with your energy supplier if necessary, that your point of connection where you
want the device to be operated meets the requirement specified above.
3 June 2010
Managing Director
Mr Arnold
J. Bürkle FBL; QS
18