Güde GADH 254 P Mode D'emploi page 12

Introduction
To enjoy your new surface and thickness planer as long as
possible, please read carefully the Operating Instructions and
the attached safety instructions before using it. Further, we
recommend keeping the Operating Instructions to recall the
product features in the future.
Within the continuous product development, we reserve the
right to make technical changes to improve it.
Therefore, pictures are for illustrative purposes only.
Marking
Product safety:
Product corresponds to
applicable EU standards
Prohibitions:
General prohibition
(in connection with another
icon)
Caution! Do not wear jewels!
Wear a hairnet if you have
long hair!
Warning:
Warning/Caution
Warning against dangerous
voltage
Commands:
Please read the Operating
Instructions before using the
machine
Wear protective gloves!
No pulling the cable
Environment protection:
Dispose waste professionally
so as not harm the
environment.
Protect against rain!
No free and loose clothing!
No touching inside!
Risk of injury!
Caution! Risk of injury by
planing knives!
Wear protective glasses
and ear protectors!
Use a respirator!
Packing cardboard material
may be delivered to
collecting centres for
recycling.
Any defective and/or disposed
electric or electronic devices
must be delivered to
respective collection centres.
Package:
Protect against moisture
Technical specifications:
Connection
Thicknessing
Weight
Machine
GADH 254 Surface and Thickness Planer
Professional machine for craftsmen and handymen. Steel
basic body; powder finish. Aluminium-alloy surfacing and
thicknessing table; entire set with supporting feet out of angle
steel. Simple chip reduction setting using hand crank.
Professional knife shaft with 2 knives. Easy thicknessing to
surfacing changeover.
Equipment:
Knife shaft with 2 HSS planing knives, 4 supporting feet,
surfacing and thicknessing table, exhaust cover, shavings
exhaust neck, undervoltage release switch, overload
protection.
Supply includes (pic. 1)
1. Shaving exhaust cover
2. Height adjustment crank
3. Gauge
4. 2 feed handles
5. Shaving exhaust connection
6. Flat key
7. 3 Allen keys
8. GADH 254 P surface and thickness planer
9. Surfacing height adjustment
General safety instructions
The device corresponds to the state of the art and guarantees
maximum safety possible. Safety, however, may only be
reached if all necessary measures are taken. The operator is
obliged to schedule these measures and check if they are
being fulfilled. All instructions must be read. Errors in
compliance with the below-mentioned instructions may lead to
electric shock, fire and/or serious injuries. The below-used
term "electrical device" relates to cable-powered tools (with a
feeder cable), battery-powered tools (without a feeder cable),
machines and electrical devices. Use the electrical device in
accordance with the as designated provisions while
complying with the general safety and preventive regulations.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
12
Interseroh-Recycling
system with serial number
This side up
Engine output
Surfacing