The Receiver Locat R - Chauvin Arnoux LOCATO 110 Mode D'emploi

The Receiver
The Receiver LOCAT R, the only model of Receiver, is powered by a
standard 9 V battery. It can be used with either of the two models of Emitter.
Sensitive to the magnetic field created by the pulsed current, the Receiver
reacts by the emission of a dual audio and visual signal, proportional to the
intensity of the signal picked up and thus to the distance from the wire
carrying the pulsed current.
The intensity of the beep is a function of the distance separating
Sighting arrow
The receiving coil for the magnetic field
is housed at the position of the arrow.
Sighting axis
Symbol for beep
the receiver from the cable to identify.
Coil axis
Luminous scale composed of 9 red
diodes, the level of maximum detection
being on the right, the minimum level
on the left.
and sensitivity selection
The sensitivity selection depends
on the proximity of the cable to be
identified. By pressing two buttons at
the same time, intermediate sensitivity
is selected. (Positions 2 and 4).
31
Visual signal
ON/OFF