Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GENERAL SPECIFICATIONS AND
CONFORMITY WITH STANDARDS
ELECTROMAGNETIC COMPATIBILITY
(To NF EN 55 081-1 and NF EN 55 082-1)
Emission : class B
(To NF EN 55 014 and NF EN 55 022)
Immunity
- Electrostatic discharges (To IEC 801-2) : level 3 (8kV - aptitude B)
- Electric fields (To IEC 801-3) : level 2 (3V/m - aptitude A)
- Rapid electrical transients (To IEC-4) : level 2 (1kV - aptitude B)
EMITTERS LOCAT E110 and E220
Supply
- Emitter E110 : from 9 V to 140 V AC and DC
- Emitter E220 : from 180 V to 330 V DC
For the Emitter E110, the network power supply may be replaced by a
9 V battery (checking an installation not connected to a network). This
battery must be of alkaline type to be able to supply impulses of 250 mA.
- Working frequency: 50 or 60 Hz
- Average consumption: 5 mA
- Peak consumption: 250 mA during the conduction period of 10 ms
(frequency of 3500 Hz for 10 ms every 320 ms).
Electrical safety
- Double Insulation
- Dielectric strength : 4kV (To IEC 348)
- Electric shocks : withstand 5kV, 2 joules (To IEC 801-5)
NB : An overvoltage may blow the fuse, from :
- 1.5kV for emitter E 110
- 2kV for emitter E 220
RECEIVER LOCAT R
- Power supply : 8 V ± 1 V (9 V alkaline battery)
- Consumption : 20 mA
NB : Variations in climatic and supply magnitudes (in working range)
have very little distortion effect on the sensitivity of detection. There
is a slight loss of sensitivity from 9 V to 30 V AC for the Emitter E110.
CASES
- Dimensions: 215 x 55 x 45 mm
- Weight : 250 g
- Protective index (to standard IEC 529) :
IP 10 for the Receiver
IP 40 for the Emitters
- Resistance to being dropped (IEC 68-2-32) : 1 meter
- Self extinguishing : Vo (To UL 94)
CLIMATIC CONDITIONS
- Reference temperature : + 23°C ± 3°C
- Working temperature : 0°C to + 50°C
- Storage temperature : - 20°C to + 50°C
- Relative humidity : 20% to 70% RH
from 180 V to 440 V AC
: class II (To IEC 348)
47
45
55
Publicité
Chapitres
Table des Matières
