Güde WP 12 T Mode D'emploi page 17

Parts of the packaging (e.g. foil, styropor) may be dangerous for children. Risk of suffocation!
Keep these parts of the packaging out of reach of children and dispose as soon as possible.
Operation requirements
Operator must read the manual properly prior to use.
Qualification
Except detailed instruction by an expert, there is no special qualification needed to operate the machine.
Minimum age
Operate the machine can only persons over 16 years.
Exception is using by the youths during professional training under the supervision of an instructor.
Training
Operating the machine requires only corresponding instruction by an expert resp. user's manual. Special training is not necessary.
Technical data #24420
Pressing power:
Operating range:
Oil pressure:
Lift height:
Basic dimensions (LxWxH):
Weight net:
Technical data #24422
Pressing power:
Operating range:
Oil pressure:
Lift height:
Basic dimensions (LxWxH):
Weight net/gross:
Transportation and storage
Machine is meant for stationary utilization only.
Machines not in use have to be stored in dry, locked room.
Assembly and first start up
Safety instruction for the first start up
•
Pay attention to secure fastening of the machine to the suitable surface.
• Ensure that all fastenings are tight
Procedure
•
Fasten the machine firmly to the ground
Operation
• By inserting the pin into the frame set the working height needed.
• Close the valve of lifting cylinder
• Pump up with the lever of the lifting cylinder
• By opening the valve, lifting cylinder is coming back to the original position.
Safety instructions for operators
•
Use the machine after you have read the manual carefully
•
Follow all safety instructions stated in the manual
• Act responsibly towards other persons
Inspections and maintenance
Keep the machine clean and dust free.
Grease all moving parts.
12 t
50-680 mm
6 adjustment options
145 mm
680 x 670 x 1330 mm
60,4 kg
20 t
90-780 mm
7 adjustment options
145 mm
680 x 670 x 1500 mm
83,3 kg/ 90 kg
17