Publicité
Les langues disponibles
Les langues disponibles
Delivery volume
Part number
Description
1
2
3
4
5
6
12 t / 20 t lift.
7
8
9
Lifting board
10
11
Warranty
A warranty period of 12 months applies to commercial use and 24 months apply to private use and commences on the day of purchase
of the device.
Warranty applies exclusively to failures due to defective material or workmanship. An original sale slip with indication of date of sale
must be presented in case of claiming for the warranty rights.
Warranty does not cover unprofessional use such as device overload, violent use, damage caused by third party or foreign materials,
failure to comply with operations and assembly manual, and normal wear and tear.
Overall safety instructions
You ought to read the manual prior to first use. If in doubts about plugging and operating the machine, contact the manufacturer (service
department).
To ensure high safety level, observe following instructions:
•
Check the completeness, function and tightness of the machine!
•
Never start up malfunctioning or defective machine. Contact the manufacturer or let the machine to be checked by a qualified
mechanic
•
Always work cautiously and with necessary carefulness!
•
Never use inordinate force!
•
Always wear safety gear (goggles, gloves, safety shoes, etc.).
•
Steel, metal or other materials can brake while pressing. So take adequate safety measures around.
•
Keep children and unconcerned people out of reach.
•
Anchor the press firmly into ground, use dowels and screws.
•
Never try to stretch or squeeze springs.
•
Check all parts for function and tightness before each use.
•
Faulty parts need to be replaced with adequate spare ones.
•
While transporting the press, there might loose some air in the lifting cylinder. Due these air bubbles, the press might not work
properly. To deaerate lifting cylinder do this:
• turn the valve of lifting cylinder anticlockwise maximum twice.
• remove the plug of the lifting cylinder.
• pump up in short intervals with the lever of lifting cylinder.
• repeat this procedure as often as necessary.
• close the lifting cylinder with the plug again.
Emergency Action
Apply the first aid adequate to the injury and get qualified medical assistance as quickly as possible. Protect the injured person from
more accidents and calm him/her down.
For the sake of eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a first-aid kit. It is essential
to replace any used material in the first-aid kit immediately after it has been used. If you seek help, state the following pieces
of information:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Labels on the machine
Symbols explanation
In his manual and on the machine are used following symbols:
Amount
Press legs
Strut
Work bed
Posts
Cross part
cylinder
Spring
Hook
Steel board
Bar
2
1
1
1
1
1
2
2
1
2
2
15
Publicité
