Assembly - Tenneker TC-Barrel II Manuel De L'utilisateur

Assembly

Long leg 1x
Wheel, leg 1x
Leg Bracket 2x
Screw M6x12 4x
Connect the two legs, so that the
rivet nuts are facing to the inside
and the shorter leg is on the left.
Attach the 2 leg brackets to the legs
by use of 4 M6x12 screws, but do
not tightening them completely.
The round sections of the leg brack-
ets are facing to the bottom and to
the inside.
Bottom Shelf 1x
Slide the bottom shelf into the small
holes of the legs. The endings of the
button shelf must point upwards.
154 | ENGLISH
1
1x
Long leg
4x
M6x12
2
1x
Bottom Shelf
1x
Wheel, leg Leg Bracket
2x